Samsung HT-Z320 User Manual page 21

Installing the Cradle Stand
HT-Z420 - Front Speakers
1. Insert the stand so that it fits into the hole
as described in the figure.
2. Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen it.)
3. This is the completion of the stand
installation.
Front/Rear Tallboy Stand
How to Install the Speaker on the Stand
HT-TZ322/TZ422 - Front Speakers
HT-TZ325/TZ425 - Front/Rear Speakers
1. Turn the STAND upside-down and connect
it to the STAND BASE.
2. Insert five small SCREWS into the five holes
marked with arrows using a screwdriver as
shown in the illustration.
3. Connect upper SPEAKER to the assembled
STAND.
4. Insert another large SCREW into the hole on
the rear of the speaker marked with arrow
using a screwdriver.
<Front>
1
2
3
1
D
D
3
2
4
21