Inserting And Removing The Battery - BionX PL250HT SL XL User Manual

Inserting and Removing the Battery

Inserting the battery
Place the battery into the docking station
1
Slide the battery down the rail gently towards the connector
2
The release arm will close automatically as the battery slides towards the connector
3
Do not force the battery arm closed, this could bend the battery connector
With the release arm almost closed, hold it in place and simultaneously press in the lock cylinder –
4
you will hear a "click" when the lock cylinder is properly closed
1
Removing the battery
Turn off the BionX propulsion system (no illustration)
1
Lightly press on the battery release arm, insert the key and turn clockwise
2
The lock cylinder will protract, freeing the battery release arm (no illustration)
3
Remove the battery by opening the release arm
4
Slide the battery upwards on the rail
5
Lift the battery to remove
6
CLICK
4
CLICK
CLICK
2
6
5
6
2
4
"click"