Preinstallation Considerations; Rough In Opening; Select Location - AGA marvel M24AR Installation, Operating And Maintenance Instructions

M24ar/m30ar/m36ar series built in all refrigerator
Table of Contents

Advertisement

Available languages

Available languages

(50.8cm)
minimum
84
" to 84
"
1
7
4
8
(214cm) to (215.6cm)
"Cut out
Figure 4
Model
M24AR
M30AR
M36AR
Table A

Select Location

Locate the refrigerator in the coolest part of the room, out of
direct sunlight and away from heating ducts or registers.
Do not place the refrigerator next to heat-producing appli-
ances such as a range, oven or dishwasher. If this is not
possible, a section of cabinetry or an added layer of insula-
tion between the two (2) appliances will help the refrigerator
operate more efficiently.
Do NOT install the refrigerator where the temperature will
drop below 60 degrees F (15 degrees C) or rise above 110
degrees F (43 degrees C). The compressor will NOT be
able to maintain proper temperatures.
PRE INSTALLATION CONSIDERATIONS
22" (55.9cm)
20"
78
" (199.4cm)
1
2
Minimum, typical
width"
24" (61cm)
Cut-Out Width
23
" (59.7cm)
1
2
29
" (74.9cm)
1
2
35
" (90.2cm)
1
2
NOTE
Floor under product MUST be at or above the same level
of the surrounding finished floor, for ease of installation and
removal of unit
When planning your rough in opening a 3" removable filler
panel is recommended above the grille. To remove the
power module from the cabinet the front has to be tilted up
as shown in Figure 5 when removed for service.
-3" (7.6cm) removable filler
recommended
84
"
5
8
(214.9cm)
Maximum
9
Figure 5

Advertisement

Table of Contents
loading

Table of Contents