Table of Contents
Advertisement
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains
a small amount of non-abrasive cleaner for camera lens, or use
lens cleaning paper or a commercially available air blower to clean
the lens. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface of the lens.
When the projector is not in use, replace the lens cover.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a dry soft cloth. When the
cabinet is heavily soiled, apply a small amount of mild detergent
and finish with a dry soft cloth. Avoid using an excessive amount
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals
might scratch the surface of the cabinet.
When the projector is not in use, put it in an appropriate carrying
case to protect it from dust and scratches.
Attaching the Lens Cover
When moving the projector or while it is not in use over an
extended period of time, replace the lens cover.
1
Thread the string through the hole on the lens cover and
then tie a knot in the string to secure it in place.
2
Thread the other end of the string through the hole at the
bottom of the projector. Then pass the lens cover through
the resulting loop of the string. Tie a knot in the string to
secure it in place.
Maintenance and Cleaning
1
2
47
Advertisement
Table of Contents
