Various Server Settings - Sharp AL-2051 Operation Manual

SCANNER FUNCTIONS

Various server settings

The procedures for using [Quick Setup] are explained here. [Quick Setup] is used to
quickly configure only the required settings for "DNS", "SMTP", and "LDAP" servers.
These settings are normally configured first.
DNS server: If you entered a host name in "Primary SMTP Server" or "Secondary
SMTP server: SMTP is used to transmit e-mail that is sent using Scan to E-mail or
LDAP server: If mail addresses are managed on your network by an LDAP server,
Configuring DNS, SMTP, and LDAP server settings.
1
Click [Quick Setup] in the menu
frame.
2
Enter the required information in "DNS", "SMTP" and "LDAP".
For explanations of each setting, click [Help] in the upper right-hand corner
of the window.
3
When you have completed all of the entries, click [Submit].
The entries will be stored.
112
SMTP Server" of "SMTP", you must also configure your DNS server
settings.
You will also need to configure your DNS server settings if host names
will be entered in "Hostname or IP Address" when storing destinations
for Scan to FTP (Scan to FTP (Hyperlink)) or Scan to Desktop.
Scan to FTP (Hyperlink). To use these transmission methods, your
SMTP server settings must be configured.
the e-mail addresses stored in the LDAP server can be used for Scan
to E-mail.
To allow the machine to use the e-mail addresses in the LDAP server,
the LDAP server settings must be configured in the Web page.
If you need to configure advanced settings for the DNS, SMTP, and
LDAP servers, follow the procedures below.
• Configuring DNS and SMTP server settings
Click [Services] in the menu frame to display the services setup
screen. Select the desired server and then configure the required
parameters for that server.
• Configuring LDAP server settings
Click [LDAP] in the menu frame to display the LDAP setup screen.
Configure the required parameters.