Sharp AL-2051 Operation Manual page 83

Item
Auto,
Default Paper Tray 1,
Source Tray 2*,
Bypass (Auto)
1-Sided,
2-Sided Print 2-Sided (Book),
2-Sided (Tablet)
ROPM (Rip
Once, Print Enable, Disable
Many)
PCL Settings
Item
Select one of 35
Symbol Set
sets.
Select one
Font internal or one
external font.
CR=CR; LF=LF;
FF=FF,
CR=CR+LF;
LF=LF; FF=FF,
Line Feed CR=CR;
Code LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
Wide A4 Enable, Disable
Selections
Set the default paper tray.
* Selections available depend on the trays that
are installed.
When [2-Sided (Book)] is selected, two-sided
printing takes place so as to allow binding at
the left side. When [2-Sided (Tablet)] is
selected, two-sided printing takes place so as
to allow binding at the top.
This enables the ROPM function. When
enabled, multi-page print jobs are stored in
memory before printing, and thus the computer
does not need to repeatedly send the print
data when multiple copies are printed.
Selections
This specifies which country's characters (PCL
symbol set) are assigned to certain of the
symbols in the character code list. The factory
default setting is [PC-8].
This specifies which PCL font to use for
printing. One font can be specified from among
the internal fonts. The factory default setting is
[0: Courier].
This specifies the line break code by means of
a combination of the "CR" (return) code, "LF"
(line break) code, and "FF" (page break) code.
The factory default setting is printing based on
the transmitted code. The setting can be
changed by selecting one of four combinations.
This setting can be enabled to print 80 lines on
A4 size paper with each line 10CPI font
(English characters). When the setting is
disabled (a checkmark does not appear), each
line is 78 characters long.
PRINTER FUNCTIONS
Description
Description
81