Position Menu; Route Information Screen - Boss BV9386NV User Manual

Hide thumbs Also See for BV9386NV:
Table of Contents

Advertisement

Button

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the
Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as
the GPS position is not useful as a route point.
To open the Position menu, tap

4.1.6 Route Information screen

The Route Information screen has all the data and some of the functions you need while you
navigate. There are two ways to open this screen:
It can be opened directly from the Map screen by tapping the Turn Preview field (
In Advanced mode, from the Navigation menu tap the following buttons:
In the top section of the screen you see information about the current route. The fields on this screen
are continuously updated while you keep the screen open.
When you open the screen, all fields contain information about reaching your final destination. Tap
any of the fields to see data on the via points starting from the first one through the final destination
again.
You have the following data and functions on this screen:
Name
Route line
The upper part of this screen shows your planned
route as a horizontal line. Its leftmost point is the
start of the route, the rightmost one is the final
destination, and you can see your via point flags
along the line, spaced in proportion to their
distance.
Estimated
Shows the estimated arrival time at the final
Arrival
destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffic jams
and other possible delays.
56
is legal to use this feature at your location.
If the Cursor is at or near a Road Safety Camera, this button replaces the
previous one, and opens a new screen where you can edit the details of
the camera.
.
Description
Description
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
).
,
.
Function

Advertisement

Table of Contents
loading

Table of Contents