Boss BV9386NV User Manual page 17

Icon Information
There is no valid GPS
position
Traffic restriction
Second route event
(manoeuvre after the
,
next manoeuvre)
Approaching a Road
Safety Camera
Stops the running
simulation
Route recalculation
progress
Indicator strip
The following symbols appear in the Indicator strip:
Icon
The sound output of iGO8 is muted.
The sound output of iGO8 is enabled.
iGO8 records a Track log when GPS position is available.
Track log recording is disabled.
No TMC receiver is connected or TMC is turned off.
Details
If there is no valid GPS
position, this symbol
appears here.
When GPS position
available but there is no
route to be navigated, the
traffic restriction of
upcoming intersection
shown here if there is any.
When GPS position and an
active route are
available, this field shows
the route event that follows
the next route event shown
in the above described
area.
This icon appears when
you are approaching a
Road Safety Camera, and
the warning for cameras is
enabled in Settings.
This icon appears during
Route Fly Over, Route
Simulation, and Track Log
playback.
During route recalculation,
this field shows the
recalculation progress
between 0% and 100%.
- sounds muted/enabled
- Track Log recording
- TMC status
Description
Action
Tap this area to open the GPS
Data screen to check the signal
status or the connection settings.
is Nothing happens if you tap this
area of the screen.
the
is
Tap this area to open the Itinerary
screen with the turn by turn
both
guidance instructions.
Tap this area to suppress the
audible camera warning.
Tap again to display the second
route event with the possibility to
open the Itinerary.
Tap this area to stop the
simulation.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
17