Selecting An Intersection As The Destination - Boss BV9386NV User Manual

3.1.2.4 Selecting an intersection as the destination

The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. By default, iGO8 proposes the country/state and settlement where you are. If needed, tap the
button with the name of the country/state, and select a different one from the list.
3. If needed, change the settlement:
To select the settlement from the list of recently used ones, tap the
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
4. Select the settlement from the list.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
After entering a couple of characters, the names that match the string appear in a
list.
Tap
4. Select the street from the list.
5. Tap the
If only a few intersecting streets exist, their list appears immediately.
In case of a longer street, a keyboard screen appears. Start entering the name of the
intersecting street on the keyboard. As you type, if the matching streets can be shown
on one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in the middle. Tap
mode) or
automatically calculated, and you can start navigating.
34
(Simple mode), or
After entering a couple of characters, the names that match the string
appear in a list.
Tap to open the list of results before it appears
automatically.
.
to open the list of results before it appears automatically.
button.
(Advanced mode) from the Cursor menu. The route is then
,
.
(Advanced mode).
button.
(Simple