Sirius Satellite Radio Sportster 5 User Manual page 76

4. The selected preset number will flash and then remain lit on the display to show
that it has been memorized.
If the preset button you selected already has a channel stored in it, the preset will be
replaced with the newly stored channel.
Recalling Channel Presets
The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0 through
9
buttons.
1. Press the
BAND
button to activate the preset bank you want. The selected bank is
shown in the lower right corner of the default display screen.
2.
Press the desired preset button
0 - 9
to select the preset. The channel will change
and the display will revert to the Default screen for the new channel, with the pre-
set shown in the lower right corner.
Pressing and holding the
BAND
button for
1 1 /2
seconds displays the
My
PRESETS screen
(see below).
My
PRESETS SCREEN
You can use the Knob to quickly see what's playing on all of your presets:
1.
Press and hold the
BAND
button to activate the
My
PRESETS screen (see Figure 54).
Figure 54
2. Turn the Knob in either direction to move through the presets. When the preset you
want to listen-to is highlighted. press the Select button to tune to it.
76
[Operation]