Vent Mount Method (B)
To mount the vehicle dock using the vent mount method, install the vent mount as follows:
1. If the vent louvers in your vehicle are recessed, you may need to use the longer vent
hooks with the vent mount. Refer to Figure 4 and install the longer vent hooks into
the vent mount. Be sure to observe the orientation of the vent hooks as shown.
2. Attach the vent mount to the vehicle dock using the provided screws. (See Figure 5.)
Remove
End Cap
Slide Short
Vent Hooks Out
(F"~~::;:'i
:
S:"1~--,;!,
i
i
~~...,.
.• _._.
t.1
1
,L;_
Slide Extended
Vent Hooks In
rr~[~,
·"-·1::t.:~
. . .
!.,..
Figure 4
Replace
End Cap
Figure 5
18
[Installation]