Cisco TelePresence MX300 G2 Installing page 7

Installing Cisco TelePresence MX300 G2 - Wheel Base
6
Mounting the back cover
E
lock/unlock the back
78-100145-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
Lift this handle to
cover. Use both
hands if required.
Wind up the cables on the hook on
the back cover when rolling the unit.
EMC Class A declaration
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.
声 明
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
On our web site you will find an overview of the
worldwide Cisco contacts.
Go to: http://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA