Setting The Hotel Option Data - Samsung HG40EC890 Installation Manual

To Enter: Press the MUTE
To Exit from this menu : power off and turn on again.
✎
Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num
Min Volume
Power On
Max Volume
Power on Source
Power On Option
Channel Setup
Channel Editor
Channel
Mixed Channel Map
Dynamic SI
[HC890-EU]Install Guide-X0ENG.indd 21

Setting the Hotel Option Data

.
→ 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
Item initial value
Select Hospitality mode.
Standalone • Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
OFF
• Standalone mode : Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See
Last Saved
• Last Saved : If you select this item, when the TV is turned on, it displays the chan-
1 When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analogue air band), DTV (digital air band), CATV (analogue
ATV
cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On Volume
Last Saved
• Last Saved : When the TV is turned on, it returns to the volume that had been set
10 The TV turns on with this Volume Level in Stand Alone Hospitality mode.
0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
TV Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to
Last Option
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Tuning, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired
• Apply the video mute to channels you select. The video mute blanks out the video
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite)
channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespective of the
ON
• Off: When OFF, guest can access the Channel Map corresponding to the selected
• On : Check the DTV Programme channel number. (the TV channel editor is inac-
OFF • Off: Do not check the DTV Programme channel number.
Description
Seachange / MDC / Innvne
Power On Channel and Channel Type below.
nel it was displaying when it was turned off.
below.
when the power had been turned off.
Stand-by. If it was on, it turns on.
channel number order.
from a channel and outputs only the sound while displaying a speaker icon on the
screen.
selected antenna type. The Channel list will also populate Air as well Cable type
channels.
antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show
the selected antenna type channels.
cessible)
(the DTV channel editor is accessible, but additional channel Programme number
update is not supported)
21
English
2014-05-22 4:37:13