Samsung HG40EC890 Installation Manual page 30

y Plug & Play OSD
– Initial Highlight: Interactive
– If Standalone Only button is selected, Standalone hotel mode is set by default and "Standalone mode is set" OSD is
displayed for 3 seconds.
– TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for 3 seconds.
– When Interactive mode is selected, the Interactive Setup Menu appears. Press the power off button to exit from the
Interactive menu.
– When Standalone Plug & Play mode is selected, the "Select Menu Language" OSD is displayed.
y Select Menu Language OSD
– When Standalone Plug & Play is selected from "Easy Set Up" OSD, "Select Menu Language" OSD is displayed.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If the ENTER button is pressed, "Select Area" OSD is displayed.
y Select Country
– Initial Highlight: United Kingdom.
– The Country OSD is displayed and the area can be selected.
y Clock setting OSD
– Display time: 30 seconds.
– The Clock Set item OSD is displayed
– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.
y Auto Search Mode OSD
– If skip option is selected, this goes to Clock setting OSD.
– If the ENTER button is pressed, auto searching of channels is performed.
– The OSD Display time, from the time that Auto Store is started to the time that Auto Sort is completed, is 30 seconds.
y Picture Mode OSD
– Initial Highlight: Standard.
– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
– After selecting the picture mode and the TV enters Standalone Setup Menu OSD, press power off to exit.
30
English
[HC890-EU]Install Guide-X0ENG.indd 30 2014-05-22 4:37:15