Sleep Operation Procedure; Off-Timer Operation Procedure - Mitsubishi SRK63ZE-S1 User Manual

SLEEP operation procedure

I The unit stops automatically at the end of the set period of time.
The room temperature is automatically controlled when the set time lapses, so that the room does not become too cold during cooling or too warm
during heating. Page 13
Changing of set time
Set to a new time by using SLEEP button.

OFF-TIMER operation procedure

I The unit stops automatically at the end of the set period of time. If it is stopped, perform the operations starting with STEP 1 and if running start with STEP 2.
Changing of set time
Set a new time by using the OFF TIMER button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
1
Press the SLEEP button.
I If this is pressed while the unit is off
SLEEP operation starts with the previous operation settings, and the air conditioning is
turned off after the time that has been set passes.
I If this is pressed while the unit is running
Each time the button is pressed, the indication changes as follows:
Example: You wish it to stop after 7 hours.
Set to
The timer light (yellow) is on.
1
• The unit stops at the end of the set period of time.
Releasing procedure
Press the CANCEL button to turn off the SLEEP indicator.
Example: You wish it to stop 22:30.
1
Press the ON/OFF button.
2
Press the OFF TIMER button.
OFF TIMER indicator
3
Press the "
Each time the
Each time the
Set at 22:30.
4
Press the OFF TIMER button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
• The unit stops at the end of the set period of time.
– 11 –
No indication
(cancelled)
h
is blinking.
or " button.
button is pressed, the indicator is switched in the order of:
...
0:00 0:10 0:20 1:00
button is pressed, the indicator is switched in the order of:
...
0:00 23:50 23:40 23:00
h
... (Units of one hour)
1:10 (Units of ten minutes)
22:50 (Units of ten minutes)
Press within
60 sec.!