™
F O R
T H E
L
O
V
E
O
F
M
U
S
I
C
LP100Z
©
OWNER'S MANUAL AND
INSTALLATION GUIDE
INTRODUCTION
You have purchased an amplifier that leads the way with sound quality, reliability,
and features. These high performance amplifiers deliver what you ask for:
smooth, effortless listening, or hard driving power to get you down the road.
LINEAR POWER™ has been a name recognized since 1975 as a product
delivering high quality and audio excellence. Now, you have the results of that
experience.
LP100Z
features include: frequency programmable high-pass, low-pass, or
©
bypass cross-over filter; high current, gold plated power connector, gold plated
5-way binding post speaker connections, panel mount fuse, high quality
components, bass and treble controls (Z models only), and LINEAR POWER™
reliability and commitment to excellence. Enjoy the Music!!
IMPORTANT NOTICE
The LP100Z
is NOT 2-ohm mono stable. While it may be used in 2-ohm
©
stereo, if you hook-up this amplifier in 2-ohm mono it will DAMAGE the unit and
VOID your warranty. For further information on this, or assistance to calculate
your total speaker load impedance, please call T.I.P.S. Inc. (see info under
Service or Repair heading)
CONTROLS and CONNECTIONS
Please read through this entire section before installing your amplifier in the
vehicle. Disconnect the negative (-) battery terminal in your vehicle and remove
the fuse from the amplifier before making or breaking any connections. Do not
install power line fuse at battery or amp until the installation of your amplifier is
complete.
1. Input connections: Connect with quality RCA patch cords from the head unit,
preamplifier, crossover, or any other sound processor.
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
1
LINEAR POWER™ is a trademark of Linear Power, Inc.