Ford 2012 Escape Hybrid Owner's Manual page 223

Switching off traction control
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off the traction control features of the AdvanceTrac
with RSC system may be beneficial because the wheels are allowed to
spin. This will restore full engine power and will enhance momentum
through the obstacle. To switch off the traction control, press the
traction control off button. Full features of the stability control system
can be restored by pressing the traction control off button again, or by
turning off and restarting the engine.
If you switch off the traction control, the stability control "OFF" light will
illuminate steadily. Pressing the stability control off button again will turn
off the stability control "OFF" light.
In R (Reverse), ABS and the engine and brake traction control features
will continue to function; however, ESC and RSC are disabled.
AdvanceTrac with RSC Features
Stability
Button
control
functions
light
Illuminated
Default at
during bulb
start-up
check
Button pressed Not
momentarily Illuminated
Button pressed
Not
again after
illuminated
deactivation
1
When the AdvanceTrac button is pressed momentarily, traction
control is disabled.
2
When the AdvanceTrac button is pressed and held for more than five
seconds, trailer sway control is disabled.
2012 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)
RSC /
Stability
ESC/
control
Traction
"OFF"
control
Illuminated
Enabled during bulb
check
Illuminated
1
Enabled
solid
Not
Enabled
illuminated
Driving
Trailer
sway
Enabled
Enabled
2
Enabled
223