Ford 2012 Escape Hybrid Owner's Manual page 101

Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys , in which case, you will
need to use your remote start system to reset all MyKeys as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey section.
Troubleshooting
Condition
Can't create a MyKey
Cannot program the MyKey
optional settings
2012 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)
Locks and Security
Potential Causes
• Key in the ignition is already a
MyKey
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)
• SecuriLock Passive Anti-Theft
System is disabled or in unlimited
mode
• Vehicle has been started using a
remote start system that is
programmed as MyKey . Refer to
Using MyKey with Remote Start
Systems section.
• Key in the ignition is a MyKey
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section
• Vehicle has been started using a
remote start system that is
programmed as MyKey . Refer to
Using MyKey with Remote Start
Systems section.
101