La-Z-Boy Spas Premier Owner's Manual page 32

the water intensity over time. Each pattern repeats every 12-15 minutes.
Note: The INTENSITY button
1. Press the On/Off (Power) button
2. Press the Basic button
steady, hear the AquaFlex motor change speeds, and feel the jet pressure change
intensity.
3. Press again to change the mode (see Table 3). You should see the next status
light come on steady providing a different massage experience each time you press
this button.
4. Press to manually turn off the control.
5. After selecting the desired mode, the pump runs for 12-15 minutes in that mode
after which time it slows*.
Mode Description
B1 Stroking – A soothing, stroking movement to encourage lymphatic
return.
Kneading – A slow, rhythmical movement that simulates kneading
B2
action.
Friction – A mild, scrubbing technique used to stimulate cellular
B3
activity.
B4 Vibration – A calming technique that warms and relaxes the
muscles.
Percussion – A stimulating technique that assists blood flow and
B5
circulation.
B6 Triggering – A form of trigger-point therapy that precisely applies
and releases pressure.
B7 Rolling – A restful technique that penetrates deeply into the
tissues.
* For Pump 3 (and Pump 1 in filter cycle mode), it slows to 40% and turns off after 20 minutes. For
Pump 1 in constant filtration mode it slows to 20% but does not shut off.
For HELP, call La-Z-Boy
does not operate in this mode.
.
. You should see the B1 (left-most) status light come on
Table 3 - Massage Styles
Spas at 1.800.465.2933.
®
32
Jet pressure