La-Z-Boy Spas Premier Owner's Manual page 27

SPA SUBMENUS
Your spa / hot tub can be programmed to specify how long it filters the water each day
(filter cycle). Four pages of menus control: when the filter cycle turns on/off (start time),
how long it runs each time it turns on (duration), how many times per day cycles should
run (frequency) (default is 12:00 AM, 2 hours, 2 times/day).
Note: When your spa / hot tub starts a filter cycle, the pumps turn on for about one
minute to purge the plumbing lines
Start
Duration
Frequency
For HELP, call La-Z-Boy
This submenu allows you to personalize operating settings of
your spa / hot tub – such as the total filtration cycle, economy
times, and a maintenance reminder – and to display any
warning messages. When your spa / hot tub is in a filter cycle,
the icon appears on the topside control panel.
Figure 13 – Filter Cycle Screens
.
Press +/- to set the starting hour of the Filter Cycle, press > to
select minutes, and then press +/- to set the starting minute.
Press to go to the next screen.
Press +/- to set the duration of each Filter Cycle (i.e., when-
ever a cycle runs, how long should it run). Press
the next screen.
Press +/- to set the number of times each day the Filter Cycle
runs (2 recommended). Press
Figure 14 - Economy Screens
Spas at 1.800.465.2933.
®
27
to go to
to go to the next screen.