La-Z-Boy Spas Premier Owner's Manual page 30

INFORMATION SUBMENUS
These sub-menus allow you to view spa / hot tub equipment data such as the
electronic controller, heater, and keypad software version. You can also reset all
programmed settings back to default factory values, and finally to upgrade keypad
software.
SMART WINTER MODE
If the system (sensor located inside controller) detects ambient conditions
below 42ºF, it automatically enters the Smart Winter Mode for a period of 24
hours. In this mode, the pumps runs for one minute, several times per day to
prevent water from freezing in the pipes.
For HELP, call La-Z-Boy
Figure 18 – Information Submenus
This submenu allows you to reset the keypad setting to the
factory default.
Press OK button to reset the keypad to the factory defaults.
Press to go to the next screen.
This submenu allows service personnel to perform a
firmware upgrade on the keypad. This action should be
performed by authorized service personnel only.
Press the X
button to start the upgrade. Press
settings.
Spas at 1.800.465.2933.
®
Keypad Default
Keypad Upgrade
button to abort the upgrade. Press the OK
30
to save the