La-Z-Boy Spas Premier Owner's Manual page 20

10. Press the Pump 3 button
AquaFlex pump turn on, see water circulating in the spa / hot tub, and see the icon
swirl on the display. If Pump 3 has not primed after 3 minutes repeat same priming
procedure of step 3 above for Pump 1. Check and adjust the water and airflow of
every jet from Pump 3 if necessary.
Note: Repeatedly pressing the button raises the speed each time (40%, 60%, 100%,
and OFF).
11. Continue pressing
turns Pump 3 off after 20 minutes, unless you turn it off first.
12. Press the Light button
through the many available colors. Once a desired color is found, pressing this
button again stays on this color.
13. Press
off after two hours, unless you turn it off first.
For HELP, call La-Z-Boy
until Pump 3 turns off. A built-in timer automatically
to turn the light on. Press this button again to cycle
again to turn the light off. A built-in timer automatically turns the light
Spas at 1.800.465.2933.
®
(if equipped). You should hear the second
20