Add Incoming Call To Existing Call - Cisco TelePresence EX60 User Manual

25 Conference Calls with Multiple Participants

Add Incoming Call to Existing Call

Add: Provided
that your system
supports it: Accept
the incoming call
and merge it with the
ongoing call.
Some systems may
accept that you
merge the incoming
call with the existing,
but as an audio-only
call.
You may be
prompted to put the
current call (or group
of calls) on hold
before merging can
take place.
The identity of the new
incoming call is stated
Accept the incoming
call, while holding the
current call or group of
calls.
Decline the incoming call
here.
and carry on as you have
been doing.
Accept the incoming
call, while ending the
current call or group of
calls.
About Adding Incoming
Calls
Assume that you are already in a call.
If you then receive another incoming
call, you will have the following
options:
•
You may decline the call and
continue with what you were
doing.
•
You may put the current call on
hold and accept the new call. At
any time you may swap between
the two.
•
You may transfer the incoming call
to someone else, including the
one you were talking to.
•
You may, after putting the
incoming call on hold, later decide
to merge this call with the existing
(optional feature).
•
You may merge the incoming
call directly with the ongoing call
(ACCEPT & MERGE). This applies
to MultiSite equipped systems only.
D1501609 User Guide Cisco TelePresence
EX60 and EX90
Produced: April 2014 for TC7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.