Swisher LS12534HP Owner's Manual
Hide thumbs Also See for LS12534HP:

Advertisement

swisherinc.com
OWNER'S
MANUAL
MODEL NO.
LS12534HP
STARTING SERIAL #:
L110-055001
IMPORTANT
Read and follow all Safety
Precautions and Instructions
before operating this
equipment.
Rev. 11-048
1602 CORPORATE DRIVE, WARRENSBURG MISSOURI 64093
Manufacturing quality lawn care equipment since 1945
18029
Model LS12534HP Shown
SPLITTER
Safety
Assembly
Operation
Service and Adjustment
Repair Parts
PHONE 660-747-8183 FAX 660-747-8650
LOG
Made In The
USA

Advertisement

Table of Contents
loading

Summary of Contents for Swisher LS12534HP

  • Page 1 OWNER’S MANUAL Model LS12534HP Shown MODEL NO. LS12534HP STARTING SERIAL #: L110-055001 SPLITTER Safety Assembly IMPORTANT Read and follow all Safety Operation Precautions and Instructions before operating this Service and Adjustment equipment. Repair Parts Rev. 11-048 1602 CORPORATE DRIVE, WARRENSBURG MISSOURI 64093...
  • Page 2: Table Of Contents

    Should you have any questions concerning this warranty, please contact us toll-free at 1-800-222-8183. The model number, serial number, date of purchase, and the name of the authorized Swisher dealer from whom you purchased the splitter will be needed before any warranty claim can be processed.
  • Page 3 SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death.
  • Page 4 • NEVER operate your splitter near a flame or spark. Hydraulic oil and gasoline are flammable and can explode. • NEVER fill gas tank while the engine is hot or running. Allow the engine to cool before refueling. • This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
  • Page 5: Towing Safety

    TOWING SAFETY • Do not allow persons to ride on splitter. Do not carry any cargo or wood on your splitter. It may fall off and endanger vehicles that are following you. • Be sure support leg is in the travel position and coupling secure. This must also be retracted so not to interfere while towing.
  • Page 6: Operation

    ASSEMBLY This log splitter has been partially assembled at the factory. Refer to the drawings and part lists should it become necessary to disassemble the unit for repair or replacement of parts. Inspect all components for damage. If you believe you have a damaged part please contact customer service immediately at 1-800-222-8183.
  • Page 7 COLD WEATHER START UP The Cold Weather Clutch enables the engine to be started without having to pull through cold, thickened hydraulic fluid. Simply pull the handle out into locked position. Start engine, let it warm up, and release Cold Weather Clutch. After starting, assure that the lever has reengaged. SPLITTER OPERATION Set up the log splitter in a clear, level area and block the wheels.
  • Page 8: Maintenance

    Exercise extreme caution, as some parts are very heavy and will require sufficient persons or mechanical handling equipment. Your Swisher Log Splitter has been produced with components designed specifically to this machine. Although standard springs, hardware and ect may look similar to parts used on other machinery, they may in some cases be made of a different construction and/or materials.
  • Page 9: Decals

    SAFETY DECALS Replace decals immediately if damaged. OD16 – FUEL SHUT OFF DECAL 17943 – COLD WEATHER DECAL 12494 – HYDRAULIC FILL PLUG 12549 – DO NOT EXCEED 45 MPH DECAL DECAL 12532 – HYDRAULIC OIL DECAL 12492 – OPERATOR INSTRUCTION DECAL 11427 –...
  • Page 10 LS12534HP Motor Base Assembly...
  • Page 11 SERVICE PARTS Please have Model and Serial Numbers ready when ordering parts. Color cannot be guaranteed upon service parts. ITEM NO. QTY. PART NO. DESCRIPTION 1 16642 WELDMENT - MOTOR BASE 1 12441 Grommet - Blk Neoprne 1 1/2X2 GDX3/32 GT 2 17524 EDGING - PROTECTIVE 2 NB179...
  • Page 12 BEAM DETAIL ITEM NO. QTY. PART NO. DESCRIPTION 1 12440TC Heavy H-Beam Weldment 8 NB643 BOLT - CARRIAGE 1/2-13 X 2 1/2 GR5 ST ZY 8 NB213Z NUT - 1/2-13 GR2 ZP 8 NB508 500 LOCK WASHER 10 NB555 1/2 USS Flat Washer ZP 1 7355TK CYLINDER 5"...
  • Page 13 TONGUE DETAIL ITEM NO. QTY. PART NO. DESCRIPTION 1 12353 LS Tongue Weldment 2 10177 WASHER - FENDER 3/8 X 1 1/2, CRBN STL GR2 1 NB150 3/8 - 16 x 3 5 NB182 3/8-16 NYLOC NUT 3 NB649 3/8-16 X 3 1/2 GR5 12 NB272 3/8 SAE WASHER 1 12345...
  • Page 14 ENGINE DETAIL MODEL LS12534HP ITEM # DESCRIPTION PART # Engine Bolt 5/16-18 X 1 1/4 Serr. Flange NB253 NB515 Bolt 5/16-18 X 1 3/4 Serr. Flange (One Per - 12 Volt Engines) Nut 5/16-18 Serr. Flange NB170 Upper Spacer BB105SL...
  • Page 15 IDLER SUBASSEMBLY I TEM NO. QTY. PART NO. DESCRIPTI ON 1 16626TK Idler, Sliding / Cold Weat her 1 2077 HA NDLE GRIP, PIVOT 2 NB107 3/8-16 X 1 1/2 HCCG 1 NB272 3/8 SAE WASHER 1 NB182 3/8-16 NY LOC NUT 1 B527 Idler Pulley OD-3.25", ID-3/8"...
  • Page 16: Troubleshooting

    BELT ROUTING DIAGRAM (VIEWED FROM UNDERSIDE OF SPLITTER) TROUBLESHOOTING Problem Cause Remedy Engine fails to start. 1. Spark plug wire disconnected. 1. Connect wire to spark plug. 2. Fuel tank not full enough or stale fuel. 2. Fill tank full with clean, fresh gasoline. 3.
  • Page 17 TROUBLESHOOTING CONTINUED Problem Cause Remedy Leaking Cylinder 1. Broken seals. 1. See authorized service center. 2. Scored cylinder. 2. See authorized service center. 12 Volt Units Engine will not turn over 1. Weak or dead battery. 1. Recharge or replace battery. 2.
  • Page 18: Specifications

    SPECIFICATIONS LS12534HP Splitting 34 Tons Force 12.5 HP Briggs and Stratton I/C Engine (12 volt Start on 12V Model) Splitting Horizontal and Vertical Positions 5" X 24" Cylinder Size Pump 2 Stage with Heavy Duty Bearings Pump Specs 16 Gallons Per Minute...
  • Page 19 SWISHER HISTORY Back before electricity came to rural Missouri Max Swisher was producing lawn mowers from his mother’s chicken house. Max never liked to mow grass. He installed a gearbox on his family’s lawn mower creating a self-propelled unit. By tying one end of a rope to the mower and the other end to a tree in the center of the yard the mower circled the tree, shortening the rope and guiding the mower in concentric circles.
  • Page 20: Log Splitter

    The serial number for the engine will be found on the top of the blower fan housing. All Log Splitter parts listed herein may be ordered directly from Swisher, your nearest Swisher dealer, or from our MODEL NO. website.

Table of Contents