Other Functions; Changing The Picture Adjustment; Setting Rear Monitor Output - Pioneer AVH-P6300BT Owner's Manual

Section
13

Other Functions

Changing the picture
adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), Temperature (tempera-
ture), Black Level (black level) and
RGB Dot Adjustment (RGB dot clock adjust-
ment) for each source and rear view camera.
! You cannot adjust Color, Hue, Black Level
and RGB Dot Adjustment for the audio
source.
1 Press and hold MENU to display
Picture Adjustment.
The adjustment function names are displayed.
2 If you are adjusting the
Picture Adjustment, select the unit.
NAVI
Rear
View
Source
3 Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment items are displayed.
! Brightness – Adjusts the black intensity
! Contrast – Adjusts the contrast
! Color – Adjusts the color saturation
! Hue – Adjusts the tone of color (red or
green is emphasized)
! Dimmer – Adjusts the brightness of the dis-
play
! Temperature – Adjusts the color tempera-
ture, resulting in a better white balance
! Black Level – Emphasizes the dark portions
of images making the difference between
bright and dark more distinct
68
En
Adjusting the Picture Adjustment
for the Navigation system.
Adjusting the Picture Adjustment
for the rear view camera.
Adjusting the Picture Adjustment
for the source.
! RGB Dot Adjustment – Adjusts phase
shifting by dot clock when a Navigation sys-
tem is connected
# You cannot adjust the picture adjustment for
the rear view camera when Camera Polarity is
set to Off. (Refer to Setting the rear view camera
(back up camera) on page 62.)
# You can adjust Hue only when the color sys-
tem is set to NTSC.
# With some rear view cameras, picture adjust-
ment may not be possible.
4 Touch c or d to adjust the selected
item.
Each time you touch c or d, the level of the
selected item increases or decreases.
# Dimmer can be adjusted from +1 to +48.
# Temperature can be adjusted from +3 to –3.
5 Touch Black Level and
RGB Dot Adjustment to adjust.
# Black Level can be set on or off.
# RGB Dot Adjustment can be set to 1 or 2.
Notes
! You cannot operate this function while driving.
! Different Brightness/Contrast/Dimmer set-
tings can be set for when the illumination
switch is on and when it is off.

Setting rear monitor output

The output source for the rear monitor can be
switched to the following:
! Front – The source on the front screen of
this unit
Disc – The video and sound from the DVD
AV – The video and sound from AV input
AUX– The source for AUX input
Off– No source
Notes
! You cannot play DivX files on the rear and
front monitors at the same time.
! If Disc is set to rear monitor output, you can-
not select MW/LW band for the front mon-
itor.