When Connecting To Separately Sold Power Amp - Pioneer AVH-P6300BT Owner's Manual

Section
14 Installation

When connecting to separately sold power amp

13 cm
17 cm
Blue/white (5*)
The pin position of the ISO connector
will differ depending on the type of
vehicle. Connect 5* and 6* when Pin 5
is an antenna control type. In another
type of vehicle, never connect 5* and 6*.
•When you connect the separately sold
multi-channel processor
(DEQ-P6600) to this unit, do not
connect anything to the speaker leads
and system remote control
(blue/white).
•When you connect the multi-channel
processor to this unit, refer to
multi-channel processor's installation
manual for the connection method.
76
En
Rear output
(REAR OUTPUT)
13 cm
Front output
(FRONT OUTPUT)
Subwoofer output
(SUBWOOFER OUTPUT)
This product
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
To rear output
To front output
To subwoofer
output
Connect with RCA cables
(sold separately)
System remote control
Left

Subwoofer


Front speaker


Rear speaker

Perform these connections when
using the optional amplifier.
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Right

Subwoofer


Front speaker


Rear speaker
