Location Of Controls - Iiyama MA203DT D User Manual

LOCATION OF CONTROLS

A Power Indicator
B Stand-by Switch
( : Stand-by Symbol)
C OPQ Button (OPQ)
Switch OPQ function between ON and OFF
whenever pressing the OPQ Button. Turn
ON the OPQ function to get the optimum
picture quality when displaying DVD or other
moving pictures.
[On screen display] OPQ ON:
The OPQ setting is not saved.
NOTE
The OPQ function is turned OFF
when turning OFF the Power
Switch. Color temperature is
fixed to the factory preset 9300K
while the OPQ function is active.
D + Button
E – Button
F Menu Button
G Input Select Button (VIDEO 1/2)
Select either VIDEO IN 1 or 2 for the signal
input when both of the signal inputs are
connected to a signal source. Switch VIDEO
IN 1 and 2 whenever pressing Input Select
Button for 2-3 seconds.
NOTE
When only one of the two signal
inputs is connected to the signal
source, automatic signal input
selection occurs only with the initial
turning ON of the Power Switch.
H AC Connector (AC IN)
I D-Sub mini 15pin Connector (VIDEO IN 1)
J D-Sub mini 15pin Connector (VIDEO IN 2)
BEFORE YOU OPERATE THE MONITOR
= Optimize Picture Quality
OPQ OFF:
6