Installation On The Plasma Television; When Using The Table Top Stand; Attaching The Speaker Mounting Fittings To The Speakers - Pioneer PDP-S60 Operating Instructions Manual

INSTALLATION ON THE PLASMA TELEVISION

Plasma television with the speaker installed
Speaker mounting fitting
(for TOP-Right)
Speaker mounting screw
(M5 x 10 mm)
Speaker
Speaker mounting fitting
(for BOTTOM-Right)
Speaker mounting screw
(M5 x 10 mm)

When using the table top stand:

NOTE:
Before attaching the speaker, please attach the PDK-TS29A series table top stand (or another Pioneer plasma television stand) to
the plasma television.

1. Attaching the Speaker Mounting Fittings to the Speakers.

There are top and bottom speaker mounting fittings for both the left and the right speaker. Attach the appropriate fittings
to the top and the bottom on the back of the speakers using the supplied screws.
(It shows the attachment of the fitting on the right side. It is attached on the left side by the same procedure.)
Speaker mounting fitting (For TOP-Right)
(The skinny slot is used for mounting to the top.)
Speaker mounting fitting
(For BOTTOM-Right)
Speaker mounting
screw (M5 x 10 mm)
Bead band
(Accessories of the
plasma television)
Speaker mounting
screw (M5 x 10 mm)
Speed clamp
Speaker cable
Speaker mounting
screw (M5 x 10 mm)
Speaker mounting
screw (M5 x 10 mm)
Speed clamp Speed clamp
Screw Holes
Screw Holes
Speaker mounting fitting
(For BOTTOM-Right)
Place the speaker so its terminals
(bottom) are facing you.
English
Speaker mounting fitting
(for TOP-Left)
Speaker mounting screw
(M5 x 10 mm)
Speaker
Speaker mounting fitting
(for BOTTOM-Left)
Speaker mounting screw
(M5 x 10 mm)
Speaker mounting
fitting (For TOP-Right)
3