Operating The Monitor - Iiyama ProLite E1900S User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 21. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS.
( ( ( ( (
Press the Menu Button to start the On Screen Display feature. There are
additional Menu items which can be switched by using the
B B B B B
Select the Menu item which contains the adjustment icon relating to the
adjustment you want to make. Press the Select Button. Then, use the
Buttons to highlight the desired adjustment icon.
C C C C C
Press the Select Button again. Use the
adjustment or setting.
For example, to correct for vertical position, select Menu item of Image Adjust and then press the
Select Button. Then, select
Main Menu
Auto Adjust
AUTO
SET
Contrast/Brightness
Color Adjust
i
Information
Image Adjust
Setup Menu
?
Memory Recall
Audio Menu
1 : Exit
An adjustment page appears after you press the Select Button. Press the Select Button again.
Then, use the /
overall display should be changing accordingly while you are doing this.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Time Out has passed. Also, press the Menu button to quickly turn off the On-
Screen Display.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
ADJUSTING
Adjustments for H. / V. Position, H.Size and Fine Tune are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
Main Menu
Auto Adjust
AUTO
SET
Contrast/Brightness
Color Adjust
Information
Image Adjust
Setup Menu
?
Memory Recall
Audio Menu
1 : Exit
(H. / V.Position) by using the
Analog
2 : Select
Buttons to change the vertical position settings. The vertical position of the
V. Position
Use Up/Down to Adjust
1 : Exit
Analog
2 : Select
/ Buttons to make the appropriate
/ Buttons.
Image Adjust
H. /V. Position
H.Size
Fine Tune
Sharpness
1 : Exit
2 : H. Position
OPERATING THE MONITOR
/ Buttons.
/
2 : Select
9