Controls & Features - Cub Cadet RT 65 Operator's Manual

Controls and Features
Engine Controls
See the separate Engine Operator's Manual for additional
information and functions of the engine controls.
Gear Selection Handle
The gear selection handle is located in the center of the handle
on the tiller. It is used to select NEUTRAL, REVERSE, or one of the
FORWARD modes.
Clutch Control
The clutch control is located beneath the handle. Squeezing the
clutch control against the handle engages the wheel and tine
drive mechanisms.
Handle Adjustment Lock
The handle may be adjusted to the height desired. Loosen the
handle height adjustment lock a few turns. Pivot handle up or
down to desired position and tighten the lock.
10
Gear Selection Handle
Handle Adjustment Lock
Depth Stake
Figure 4-1
Throttle Control
The throttle control lever is located on the engine. It controls the
engine speed and stops the engine.
Choke Lever (If Equipped)
The choke lever is located by the throttle. It is used to enrich the
fuel mixture in the carburetor when starting a cold engine.
Primer Button (If Equipped)
The primer button is located behind the air cleaner. It is used to
enrich the fuel mixture in the carburetor when starting a cold
engine.
Depth Stake
The depth stake controls the tilling depth. Refer to the Operation
Section.
4
Clutch Control