Cisco 7925G Accessory Manual page 4

Cisco Accessories
Multi-Charger for Phones and Batteries
The Cisco Unified Wireless IP Phone 7925 Multi-Charger can charge up to six phones and six batteries
at the same time. See
For more information, see the
Guide.
Figure 2
Lock Set for the Phone
The lock set includes the cable, the C-ring, and the combination lock.
The security slot can accommodate a lock up to 20 mm. Compatible laptop cable locks include the
Kensington laptop cable lock and other manufacturer's cable locks that fit into the security slot on the
left side of the desktop charger.
Cisco does not supply a laptop cable lock; you must purchase a cable lock from your local electronics
Note
supply source.
To install the lock on the phone, see
Procedure
Put the cable (with loops at each end) around a post or cable that is used to lock your computer.
Step 1
Put the two loops at the ends of the cable in the C-ring.
Step 2
Insert the C-ring in the slot on the back of the phone.
Step 3
Using the combination lock, fasten the two ends of the C-ring together to secure the phone.
Step 4
Cisco Unified Wireless IP Phone 7925G Accessory Guide
4
Figure 2.
Cisco Unified Wireless IP Phone 7925G Multi-Charger Installation
Cisco Unified Wireless IP Phone 7925G Multi-Charger
Figure 3 and follow these steps:
OL-16135-02