Zephyr Angolo ZAG-E30AG Use, Care And Installation Manual page 13

1
Power Button
Blower Speed Selection
Power Button
Press to switch blower on and off. If lights are on they will also
switch off when this button is pressed.
These controls feature a memory function that will remember the last
setting before being powered off. For example: If blower is on Speed 2
and lights are on normal and the Power Button is pressed, the entire
hood will power down. If Power Button is pressed again the blower will
switch back on to Speed 2 and lights on normal.
Blower Speed Selection
Press one of these buttons to select blower speeds 1, 2, and 3. While
blower is on a blue LED back-light will illuminate the applicable Speed
Selection button and Power On/Off button.
3 Lights Normal/Dim/Off
Press to cycle through light levels Normal, Dim, and Off. While lights
are on a blue LED back-light will illuminate the button.
2
11
3
Lights Normal/Dim/Off