Broan Elite 15SSEXF Service Manual page 23

4. Remove control panel assembly (see Control Panel
Assembly, Remove and Re-install).
NOTCH SCREWS
5. To remove the bag storage, remove four Phillips head
screws that secure it to the cabinet. NOTE: Upon
reassembly, the notches on the right and left sides
must appear on the lower part of the bag storage.
Section D – Electrical Components
6. Remove six Phillips head screws each that secure the
front and rear of the stabilizer plates to the cabinet
cover (rear view shown).
NOTCH
7. To remove the power cord at the back of the unit,
rotate the power cord grommet 90º to the right, then
slide the cord out of the slot. Temporarily place the
cord in the rear of the power unit assembly to keep it
out of the way.
SCREWS
GROMMET
23