Connecting The Cables - Cisco TelePresence MX300 G2 Installing

Installing Cisco TelePresence MX300 G2 - Floor Stand
3

Connecting the cables

C D
Power
(100-240 VAC,
50/60 Hz)
Always use the provided
power cable.
The wall socket outlet must
be easily accessible after
installation.
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
Power switch
DVI-I
HDMI
Audio line input
Audio line output
USB, for future use
For maintenance only
Reset to factory settings
Touch
controller
**
LAN
**
Video output
(e.g. 2 display )
nd *
Video input
(e.g. PC )
*
Microphones
Optional
*
Use the cable that is labeled
**
with for the Touch controller;
use the cable that is labeled
with for the LAN