Planet WNAP-6350 User Manual page 99

Operating Mode
Firewall
Wireless Mode
Channel Width
Wireless Isolation
Encryption Type
Wireless Security
Multiple SSID
Max. Wireless Client
Max. WDS AP
Max. Wired Client
WMM
QoS
NTP
Management
Diagnostic tool
Mechanical & Power
IP Rate
Material
Dimensions (W x D x H)
Weight
Installation
Power Requirements
Power Consumption
Environment & Certification
 Dynamic IP
 PPPoE
 PPTP
 L2TP
 IPSec
 Bridge
 Gateway
 WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering
 AP
 Client
 WDS PTP
 WDS PTMP
 WDS Repeater (AP+WDS)
20MHz / 40MHz
Enables isolation of each connected wireless client from communicating with
each other mutually.
64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Enable / Disable SSID Broadcast
Up to 2
40
8
60
Supports Wi-Fi Multimedia
Supports Quality of Service for bandwidth control
Network Time Management
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
System Log, Ping Watchdog
IP67
Aluminum
320 x 27.5 x 320 mm
2.4kg
Pole mounting or Wall mounting
AP: IEEE 802.3af/at PoE / 48VDC input (PoE Injector included)
PoE Injector: 100~240VAC
7.68W
-92-
User Manual of WNAP-6350