Suncast PowerWind PWC15O Owner's Manual page 9

Store indoors in winter, Drain hose reel prior to freezing tempera-
tures. Freezing of trapped water may cause damage to hose reel,
hose and pipes. Periodic replacement of in tube 0-rings may be
necessary to maintain a watertight seal with out-tube.
To replace 0-rings
1. Use screwdriver to separate crossbraces at slot and lift cross-
brace firmly to disengage snap.
2. To service in-tube, grasp white release tabs on out-tube and pull.
Remove in-tube to replace 0-rings.
3. Coat new 0-rings with silicone-based lubricant.
4. To reconnect, slip out-tube over in-tube until it locks with a click.
5. Replace reel crossbrace.
Motor wire connection check.
Remove motor cover and secure quick connect terminals.
SERVICING YOUR SUNCAST HOSE REEL