Table of Contents
Advertisement
Quick Links
CARE AND MAINTENANCE cont.
• Rubber tyres can leave marks on some surfaces. The tyres can react
with some surfaces (vinyl floor coverings, carpets etc.) and cause stains.
Always stand the stroller on a protective surface indoors.
• Routinely clean the metal parts with a damp cloth & then dry
immediately.
• Fabrics should be cleaned using lukewarm water and a mild washing
detergent. Do not wash in the washing machine.
WARRANTY
Babystyle UK Ltd provides a warranty in support of the retailer from whom
you purchased this product. The warranty is effective for 6 months from
the date of purchase for the original purchaser/owner. Proof of purchase
will (at the discretion of Babystyle UK Ltd) be required in order for your
retailer to claim on the warranty. The warranty excludes any fault caused
by misuse, damage or neglect. It is the user's responsibility to undertake
routine inspection and maintenance of the vehicle in order to avoid
damage to the vehicle and/or injury to the child. The vehicle is returned
to the retailer at the owners' expense in order to ascertain if a claim under
the warranty is justified. Please carefully read the instructions on how to
look after your stroller. This does not affect your statutory rights.
Babystyle UK Limited
36 Charles Street
Sileby
Leicestershire
LE12 7RJ
UNITED KINGDOM
www.babystyle.co.uk
This instruction manual © Babystyle UK Limited 2006
All rights reserved. LUX S3D
0950/110806
12
Instruction manual
IMPORTANT – KEEP FOR FUTURE REFERENCE
Please read these instructions carefully before using your new
Pram / Travel system / Pushchair. Keep this manual in a safe
place for future reference.
Advertisement
Table of Contents
Related Manuals for BABYSTYLE LUX SBD
Summary of Contents for BABYSTYLE LUX SBD
- Page 1 The warranty is effective for 6 months from the date of purchase for the original purchaser/owner. Proof of purchase will (at the discretion of Babystyle UK Ltd) be required in order for your retailer to claim on the warranty. The warranty excludes any fault caused by misuse, damage or neglect.
- Page 2 • Check on a regular basis that all chassis locking devices are working Correct position for the car seat adaptor ……………………………….. 9 correctly. • If any part of the pushchair is damaged contact your local Babystyle Using the safety harness ……………………………………………..…..…9 retailer immediately without using the pushchair.
- Page 3 ADJUSTING THE FOOTREST IMPORTANT SAFETY INFORMATION To adjust the footrest, press the button at the top of the footrest and lift or lower the footrest to the desired position. WARNING: A child’s safety is your responsibility WARNING: Children should never be left unattended in this vehicle. Picture 6 It is important that any person intending to use this vehicle fully understands the instructions.
- Page 4 PRIMARY FEATURES CORRECT POSITION FOR CAR SEAT ADAPTOR Picture 5 Back of chassis Front of chassis USING THE SAFETY HARNESS Always apply the parking brake before placing your child in the vehicle. The safety harness has two shoulder straps, two waist belts and a crotch strap.
- Page 5 CONNECTING THE LINKED BRAKE BAR FITTING THE SEAT UNIT TO THE CHASSIS (ATTACHMENT DEVICE) Connect the linked brake to the rear wheel units by pushing the brake The seat unit can be fitted to the chassis to face either forwards or levers into the corresponding hole on the rear wheel units.
- Page 6 FITTING THE PRAM BODY TO THE CHASSIS FITTING THE SEAT UNIT FACING BACKWARDS To fit the pram body to the attachment device on the chassis, locate the retaining bars on either side of the pram body in the forwardmost position of the attachment device (Picture 1).
Need help?
Do you have a question about the LUX SBD and is the answer not in the manual?
Questions and answers