Using An S-Air Product - Sony DAV-HDX275 Operating Instructions Manual

Rear of the unit
Inserting the wireless
transmitter/transceiver
o
o
::J
-
. ,
o
0' .,
:::I:
C
s:
:::::::
m
><
-
C D
.,
::J
Q)
:t>
c:
Co
C)"
c
CD
<
o
CD
-
To insert the wireless transmitter
into the unit
1
Remove the screws and detach the slot
cover.
Em
• When you insert the wireless transmitterltransceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transcei ver.
To make use of the S-AIR function, you need to
insert the wireless transmitter (not supplied) into
the unit and the wireless transceiver (not
supplied) into the S-AIR sub unit.
I S-AIR sub unit
- - - - (S-AIR receiver)
p
)
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main unit. (The number of usable
S-AIR main unit depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier: You can enjoy
surround speaker sound wirelessly.
- S-AIR receiver: You can enjoy system
sound in another room.
(DA V-HDX275/DAV-HDX475 only)
The unit is compatible with the S-AIR function
(page 104), which allows sound transmission
between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.
Using an S·AIR Product
'-----=------------_--1
S-AIR main unit
Em
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
2
Insert the wireless transmitter.
S-AIR sub unit
(surround amplifier)
77 GB