Sony DAV-HDX275 Operating Instructions Manual page 37

The Quick Setup display appears.
4
Press
1'/oJ,
to select [QUICK], then press
e.
Press
1'/oJ,
to select the desired setting,
then press
e.
37
GB
7
Press
1'/oJ,
to select the desired setting,
then press
e.
• [AUTO (J 920 x 1080p)]: The system
outputs the optimal video signal for the
connected TV.
• [1920 x 1080i]: The system outputs 1920
x 1080i* video signals.
• [1280 x nOp]: The system outputs 1280 x
nop* video signals.
• [nO x 480p]**: The system outputs 720 x
480p* video signals.
*
i: interlace, p: progressive
**
Depending on the country model, [720 x 576p]
may appear.
5
Does your TV accept progressive
signals?
Progressive is the method for displaying TV
images which reduces flickering and sharpens
the image. To use this method, you need to
connect to a TV that accepts progressive signals.
1
Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
2
Press 0 DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press
1'/oJ,
to select
_!Ii.
[SETUP],
then press
e.
The options for [SETUP] appear.
4
Press
1'/oJ,
to select [CUSTOM], then
press
e.
The Setup Display appears.
Press
1'/oJ,
to select [VIDEO SETUP],
then press
e.
The options for [VIDEO SETUP] appear.
6
Press
1'/oJ,
to select [PROGRESSIVE
(COMPONENT OUT)], then press
e.
7
-
• When "HDMI" lights up in the front panel display,
images other than [720 x 480p] or [720 x 576p] are
stretched vertically.
DVDVIDEO
94( 99)
1 ( 1)
T 0:01:08
CUSTOM
gUSTOM
I
UICK
Depending on the connection of the TV
(page 26), select the type of video output of the
system.
Setting the type of video
outp.ut to match.
,our
TV
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and the TV with the
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
For details, refer also to the operating
instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
2
Press 0 DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press
1'/oJ,
to select" [SETUP],
then press
e.
The options for [SETUP] appear.
4
Press
1'/oJ,
to select [CUSTOM], then
press
e.
The Setup Display appears.
5
Press
1'/oJ,
to select [HDMI SETUP], then
press
e.
The options for [HDMI SETUP] appear.
6
Press
1'/oJ,
to select [HDMI
RESOLUTION], then press
e.