Sony DAV-HDX275 Operating Instructions Manual page 78

~
[tlJ
GT-~
78
GB
Rear of the unit
mm
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the T
marks are aligned.
• Do not insert other than the wireless transmitter
into the EZW-T 100 slot.
3
Make sure to use the same screws to
secure the wireless transmitter.
Rear of the unit
mm
• Do not use other screws to fasten the wireless
transmi tter.
To insert the wireless
transceiver into the $·AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
Establishing sound
transmissl;o"~8tween
the unit
and·S-AIR sub unit
(lD setting)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission. You can use multiple S-AIR main
unit by setting a different ID for each
component.
To set the ID of the unit
1
Press
IIC)
on the unit.
The system turns on.
2
Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
3
Press CJ DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
4
Press
",/oJ,
to select _ [SETUP],
then press
G).
The options for [SETUP] appear.
5
Press
",/oJ,
to select [CUSTOM], then
press G).
The Setup Display appears.
6
Press
""OJ,
to select [AUDIO SETUP],
then press
G).
The options for [AUDIO SETUP] appear.
7
Press
",/oJ,
to select [S-AIR SETUP -],
then press
G).
mm
• When the wireless transmitter is not inserted in
the unit, [S-AIR SETUP] cannot be selected.
8
Press
""OJ,
to select [ID], then press G).
9
Press
",/OJ,
to select the desired ID, then
press
G).
You can select any ID (A, B, or C).
The confirmation display appears.