Sony DAV-HDX275 Operating Instructions Manual page 65

• [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER/THEATRE*, the System Audio
Control (page 75) is activated and loud sound
may be output depending on the volume level of
the system. You can prevent this by limiting the
maximum level of the volume.
*
The button name differs depending on the area.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVELl]: Maximum volume level is set to 20.
[OFF]: Off.
mm
• This function is available only when [CONTROL
FOR HDMI] is set to [ON).
• [YCBCR/RGB (HOMI)]
You can select the type of HOMI signal output
from HOMI OUT jack.
lYCBCR]: The system outputs YCBCR signals.
[RGB]: The system outputs RGB signals.
mm
• If the playback picture becomes distorted, set
[YCHCR] to [RGB].
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals wi II be automatically
output even when you select [YCHCR).
• [AUDIO (HOMI)]
You can select the audio output status from the
HOMI OUT jack.
• [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HOMI OUT jack.
[SO 0]: The system outputs standard
resolution with a black frame.
[HO
0]:
The system outputs HO resolution
with a black frame.
[HO]: The system outputs the HO resolution
without a black frame.
[(1920 x 1080i) HO 0]: The system outputs
full size HO resolution with a black frame.
[(1920 x 1080i) HO]: The system outputs full
size HD resolution without a black frame.
mm
• [JPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 x 480p] or [720 x 576p].
• You can select [( 1920 x 1080i) HD 0 ] or [( 1920 x
1080i) HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to [1920 x
1080i].
• If you select [( 1920 x I080i) HD 0] or [(1920 x
I080i) HD], the next image appears after the black
screen.
• HDMI signal will stop momentarily when:
- The system is loading or unloading a OATA CD or
DATA DVD.
- You change the disc from a OATA CD or DATA
DVD.
- You playa DATA CD or DATA DVD to the end
and the system stops playback automatically.
-
c
iii"
o
[OFF]: The system does not output the sound
from the HOMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, OTS, or 96 kHz/24 bit
PCM signals to 48 kHz/l6 bit PCM.
mm
• When you connect the unit and TV with an HDMI
cable and [ON] is selected, [AUDIO DRC], [AN
SYNC], DYNAMIC BASS, "DEC. MODE," and
sound mode are not applied to the sound that is output
from the TV.
• When you set the function to other than "DVD," the
system does not output the sound from the HDMI
OUT jack even if you set [AUDIO (HDMl)] to [ON].
Settings for the audio
[AUDIO SETUP]
AUDIO SETUP
S-AIR SETUP:
SPEAKER FORMATION:
AUTO CALIBRATION:
AUDIODRC:
TRACK SELECTION:
OFF
OFF
65
GB