Troubleshooting
If the PX5D does not operate as you expect, please check
the following points first. If this does not resolve the prob-
lem, contact your dealer.
1. Power does not turn on.
• Are batteries installed? Alternatively, is the correct
AC adapter connected to an AC outlet?
2. No sound
• Are your guitar or bass, amp and/or headphones
connected to the correct jacks?
• Is your amp turned on and set correctly?
• Are any cables broken?
• Is the master level of the PX5D set to "0" or to a low
level?
• The VOLUME dial may have been turned down.
• Is the PX5D muted?
Be aware that if all effects are off, the chain display
will disappear, and it will not be possible to distin-
guish Bypass or Mute from the LCD display.
• Dose the LCD display "AUX>USB" in Utility mode?
When "AUX>USB" is displayed, the output of you
guitar sound will be muted.
• Is the volume of your guitar turned down?
3. The volume from the device connected to the AUX
jack is too loud or too soft, or cannot be heard.
• Adjust the output level of the connected device.
Make connections to the headphone jack of the de-
vice, instead of to its line output.
• Are you in Phrase Trainer mode?
Exit Phrase Trainer mode.
• Are you using a connection cable with a built-in resistor?
4. Effects do not apply
• Is the PX5D bypassed? (the effect chain will be blinking)
• Are the effects used in the program turned on?
5. Tuner does not work.
• Is the PX5D bypassed or muted?
6. Can't install the software
• Is the CD-ROM inserted in your CD drive?
Make sure that the CD-ROM is inserted correctly.
• Could the lens of your CD drive be dirty?
Use a commercially-available lens cleaner to clean
the lens.
• Are you attempting to install from a network CD
drive?
This software cannot be installed from a network-
connected CD drive.
53