Power Control - Samsung SC20F70 Series User Manual

POWER CONTROL

Hose Handle (SC20F70H Series)
1. ON/OFF [ ] Button
- Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. [(-/+)] Button
- Press the MODE button repeatedly to select the correct mode.
(ON) MIN → MAX
3. [ ] Button
- Press the [ ] button to operate the vacuum cleaner quietly.
Don't cover the handle transmitter when you use a
handle control button.
HOSE (SC07F70H Series)
1. ON/OFF [ ] Button
- Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. [(-)], [(+)] Button
- Press the (+) button to increase the vacuum's suction power.
Press the (-) button to decrease the vacuum's suction power.
Don't cover the handle transmitter when you use a
handle control button.
If no button is pressed for 30 minutes while cleaning, the
safety device is activated and the power is cut off.
In this case, press the [Power] button on the main unit or
unplug and then plug the power cord in again.
HOSE (SC20F70U Series)
1. ON/OFF [ ] Button
- Press the [ ] button to operate the vacuum cleaner. Press
again to stop the vacuum cleaner.
2. [SUCTION (-/+)] Button
- Press the [SUCTION (-/+)] button to increase or decrease the
suction power. Each time you press the button, you gradually
increase the suction power. After the suction power reaches its
maximum, the next time you press the button, you return the
suction power to its minimum.
3. [BRUSH ON/OFF] Button
- Press the [BRUSH ON/OFF] button to operate the UV Brush.
Press again to stop the UV Brush.
Don't cover the handle transmitter when you use a handle control button.
If no button is pressed for 30 minutes while cleaning, the safety device is activated and the
power is cut off.
In this case, press the [Power] button on the main unit or unplug and then plug the power cord
in again.
10_ operating the cleaner
sender
-/+
Handle Control
The cleaner is controlled by radio
frequency signals.
sender
- +
Handle Control
The cleaner is controlled by radio
frequency signals.
sender
Handle Control
The cleaner is controlled by radio
frequency signals.