Samsung SC07F70 Series User Manual
Hide thumbs
Also See for SC07F70 Series:
- User manual (316 pages) ,
- User manual (104 pages) ,
- User manual (96 pages)
Related Manuals for Samsung SC07F70 Series
Summary of Contents for Samsung SC07F70 Series
-
Page 1: Vacuum Cleaner
SC07F70 Series SC08F70 Series SC20F70 Series Vacuum Cleaner user manual ✻ Please read the User Manual thoroughly before operating the vacuum. English ✻ For indoor use only. Thank you for purchasing a Samsung product. -
Page 2: Table Of Contents
Contents YOUR VACUUM CLEANER BEFORE USING THE VACUUM 8 Assembly 9 Using the UV brush (Option) CLEANER 9 Installing the Dust Sensor (Option) 10 Using accessory OPERATING CLEANER 12 Power cord 12 Check filter 12 ON/OFF 13 Power control 14 Dust Sensor (Option) MAINTENANCE 15 Cleaning the dust bin and grille 18 Cleaning the outlet filter... -
Page 3: Safety Information
Safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in WARNING this manual. - Page 4 IMPORTANT SAFEGUARDS GENERAL • Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. • WARNING : Do not use the vacuum cleaner when rug or floor is wet.
- Page 5 Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. • Children should be supervised to ensure that they do not play with the appliance. • The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
- Page 6 • When the UV lamp is out of order, never disassemble or modify the product yourself. Please contact the manufacturer or service center for a replacement. • Since an internal discharge occurs within the UV Brush, never use the product near an inflammable spray or substance. • Take care not to touch the UV lamp window after using the UV Brush for an extended period of time as the surface of the window may be hot.
- Page 7 Your vacuum cleaner Handle Hose Combination accessory Pipe 2-Step brush Cyclone OPTION (Depending on model) * SC20F70U / SC07F80U Series Power turbo Parquet Mini turbo * 2-Step brush * ECO Hard Pipe * Handle * plus * master * floor* ECO carpet* Cover battery * Dust sensor * Furniture...
-
Page 8: Assembly
Before using the vacuum cleaner ASSEMBLY Connecting the Hose Connecting the handle and pipe Connecting the brush English - 8... -
Page 9: Using The Uv Brush (Option)
USING THE UV BRUSH (OPTION) Connecting the brush into the hose handle There will be a “clicking” sound when the UV brush has been installed securely on the hose handle. For safety reasons, UV brushing only runs for 30 minutes and then stops operating. To resume the operation, press the [BRUSH ON/OFF] button again. -
Page 10: Using Accessory
USING ACCESSORY Combination accessory (Option) Dusting brush Crevice tool Accessories (Option) Install the accessory to the handle. Dusting brush Crevice tool Dusting brush - For cleaning moldings, carved articles. etc. Crevice tool - For cleaning in folds, crevices and corners. English - 10... - Page 11 Pipe Adjust the length of the pipe by sliding the length control button located in the center of the telescopic pipe. For storage, park the floor nozzle Do not pick up a machine while the floor nozzle parked. CAUTION English - 11...
-
Page 12: Power Cord
Operating cleaner POWER CORD When removing the plug from the electrical outlet, grasp the plug, not the cord. CAUTION CHECK FILTER ON/OFF The filter light is illuminated when the dust pack requires checking or emptying. English - 12... -
Page 13: On/Off
POWER CONTROL Hose (controlled by radio frequency signals) ON/OFF SC07F70H / SC08F70H / SC20F70H Series Transmitter Select a lower power / higher power Select a quiet mode SC07F70U / SC08F70U / SC20F70U Series Transmitter Select a lower power / higher power UV brush ON/OFF • UV sterilization cannot be activated by itself. -
Page 14: Dust Sensor (Option)
DUST SENSOR (OPTION) Dust Sensor Operations • Indicates the amount of dust being picked up and passing by the sensor which assist the user to clean more efficiently. • The dust sensor is activated au tomatically when the cleaner runs and is turned off when the cleaner is stopped. -
Page 15: Cleaning The Dust Bin And Grille
Maintenance CLEANING THE DUST BIN AND GRILLE Empty the dust bin, if dust reaches 'MAX' or Check filter ( ) light is illuminating. Take the dust bin out by lifting the handle. Push the button aside. Turn the grille and take out it. English - 15... - Page 16 Push the button. Separate the dust bin from body. Clean the dust bin and body with water. Leave the dust bin and body in the shade until completely dry. Install the grille and turn to clockwise. CAUTION English - 16...
-
Page 17: Cleaning The Dust Filter
CLEANING THE DUST FILTER Pull the dust bin cover to open. Remove the filter from the dust bin. Shake the filter to remove dust, then wash Let the filter dry for more than 12 hours. the filter. Put the filter into the dust bin. Make sure the filter is completely dry before putting it back into the vacuum cleaner. -
Page 18: Cleaning The Outlet Filter
CLEANING THE OUTLET FILTER Take the dust bin out by lifting the handle. Pull out the Filter. Shake the Filter to clean. Install the filter and holder in main body. • The filter can be replaced and separated from holder by pulling. • Clean the outlet filter when suction is noticeably reduced continuously or the vacuum cleaner abnormal overheads. -
Page 19: Maintain Floor Tools
MAINTAIN FLOOR TOOLS 2-Step Brush • Adjust the inlet lever according to the floor surface. Floor Carpet • Remove waste matter completely if the inlet is blocked. Power Turbo Plus Brush (Optional Accessory) Frequent vacuuming of hair or pet fur may reduce cleaning effectiveness over time due to matters tangled around the drum. - Page 20 To remove dust from the dust bin of the UV brush (Option) When the dust bin is filled, turn the [Dust Removal] switch to empty the dust bin. Dust bin • While the cleaner is operating (suction), the vacuum will suck the material from the dust bin to the main unit.
- Page 21 Mini turbo brush (Optional Accessory) - To check brushroll Check brushroll, when a clog is present or debris is visible. - To check belt Inspect belt to ensure that it is in good condition. If belt is broken or cracked, replace belt according to instructions.
- Page 22 Troubleshooting PROBLEM SOLUTION • Check cable, plug and socket. Motor does not start. • Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. In operation, the • Please unclog the intake. vacuum cleaner stops after repeating runs and stops three times.
- Page 23 Product fiche [English] According to Commission Regulation (EU) No 665/2013 and No 666/2013 Supplier Samsung Electronics., Co. Ltd Model SC07F70HQ SC07F70HR SC08F70HQ SC08F70HR SC08F70HU SC08F70HV Energy Efficiency Class Annual Energy Consumption (kWh/yr) Carpet Cleaning Performance Class Hardfloor Cleaning Performance Class...
- Page 24 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRY CUSTOMER CARE CENTER WEB SITE 0330 SAMSUNG (7267864) www.samsung.com SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com DJ68-00701A-07...
Need help?
Do you have a question about the SC07F70 Series and is the answer not in the manual?
Questions and answers