InfoWave Model 9209/9211/9213/24211/24213
The DTE-DCE switch should be set to the right position as shown below and the DTE
indicator should be off. If the switch is set to DTE (left) position, the unit is in the
synchronization mode and the PWR indicator will be flashing. Please refer to the
synchronization section.
Unit 1 to Computer
PWR
DCD
InfoWave Model 9210/9212/9214/24212/24214
One unit is set to the DCE mode and the other unit is set to the DTE mode as illustrated
below. If the switch is set to the opposite position, the unit is in the synchronization
mode, and the PWR will be flashing. Please refer to the synchronization section.
Unit 1 to Computer
PWR
DCD
The InnoMedia Wireless Group
DTE
OFF
DTE
OFF
http://www.innomedia.com/wireless/
Unit 2 to Computer
PWR
DCD
DTE
OFF
Unit 2 to Peripheral
PWR
DCD
DTE
ON
8