Configuring Your Computer's Serial Port - Inno media InfoWave 9209 User Manual

Configuring Your Computer's Serial Port

InfoWave uses hardware flow control to ensure reliable data transmission. Your PC
COM port needs to be configured as shown below. To configure the serial port, do the
following:
1. At Windows 95 and 98 desktop area, issue the command sequences:
Start àSettings à Control Panel à System à Device Manager à Ports à COM1
or COM2
All the parameters should be set as shown in the above figure except the "Bits per second
" box. Choose the correct baud rate that matches your InfoWave setting.
The InnoMedia Wireless Group http://www.innomedia.com/wireless/ 12