Hardware Installation - Inno media InfoWave 9209 User Manual

Hardware Installation

InfoWave can be installed in just minutes. This chapter discusses the hardware
installation of the InfoWave system, including a description of the InfoWave hardware
components and an installation procedure.
The InfoWave kit (Model 9209/9211/9213/24211/24213/9210/9212/9214/24212/24214)
consists of:
1. 2 InfoWave units,
2. 2 Power adapters,
3. 1 mini-Din PS/2 power cable,
4. 1 Din power cable,
5. 2 9-pin-to-9-pin RS-232 cables,
6. 2 9-pin-to-25-pin adapters,
7. 1 User's manual, and
8. 1 one-year warranty card.
The illustration below shows a general diagram of how the two computers are set up with
InfoWave units.
Model 9209/9211/9213/24211/24213 Model 9210/9212/9214/24212/24214
The InnoMedia Wireless Group http://www.innomedia.com/wireless/ 6