A TTL/M (MANUAL/MULTI)
button (42, 46, 57, 61, 66)
B MODE button (19)
C TEST button (29)
The status while the lamp is lit
Amber: Flash ready
Green: Proper exposure
LCD panel illuminator
If the LCD panel is too dark, you can illuminate it by pressing the LCD illuminator
• The LCD panel remains illuminated for about 8 seconds when the flash unit is
used by itself or connected to a camera that is in power save mode. This time is
extended if the flash or camera is used.
• Press the LCD illuminator button again while the LCD panel is illuminated to
extinguish the LCD panel illuminator.
D Fn (function)/direction buttons
(41, 46, 57, 58, 61, 67)
E Power switch (16)
F LCD illuminator button
G ZOOM button (31)
Figures in parentheses are the page
numbers where a description of
each LCD segment can be found.