A Fn (function) button (15, 17)
B MODE button (27)
C TEST button (40)
The status while the lamp is lit
Amber: Flash ready
Green: Proper exposure
LCD panel illuminator
If the LCD panel is too dark, you can press the LCD illuminator button to
illuminate it and the areas around the buttons.
• The LCD panel remains illuminated for about 8 seconds when the flash unit is
used by itself or connected to a camera that is in power save mode. This time is
extended if the flash or camera is used.
• Press the LCD illuminator button again while the LCD panel is illuminated to
extinguish the LCD panel illuminator.
D Control wheel (17)
E MENU button (88)
F LCD illuminator button
G Power switch (24)
Figures in parentheses are the page
numbers where a description of each
LCD segment can be found.