Attachment And Removal Of The Flash Unit - Sony HVL-F43M Operating Instructions Manual

Attachment and removal of the
flash unit
Attaching the flash unit to the camera
• Before attaching to the camera, remove the protective cap from the terminal of the
Multi Interface foot of the flash unit and remove the shoe cap from the camera.
• When not using the flash unit, reattach the protective cap to the terminal of its
Multi Interface foot.
• If the built-in flash in the camera is protruding, lower it before attaching the
flash unit.
1
Turn off the power of the flash unit, and rotate the lock
lever towards [RELEASE] while pressing the release
button.
2
Firmly insert the Multi Interface foot all the way into the
Multi Interface Shoe of the camera in the direction of
the arrow.
3
Firmly rotate the lock lever towards [LOCK] to secure
the flash unit.
• This flash unit is suitable for a Multi Interface Shoe. When attaching this unit to
a camera that has an Auto-lock Accessory Shoe, use the Shoe Adaptor (ADP-
AMA) (not supplied).
14
GB